RS485 Service Kit PLUS

579,00 HT

Mallette complète pour débogage RS-485

En stock (peut être commandé)

UGS : 10202 Catégories : , Étiquette :

Description

Kit de Service RS485

La collection d’outils idéale pour analyser les applications de bus de terrain RS422/485.
Simuler des télégrammes ou envoyer des séquences de données à l’aide du câble convertisseur USB vers RS422/485 et du programme de terminal de bus de terrain CleverTerm fourni.
Validation de l’exactitude des demandes ou des réponses avec l’analyseur MSB-RS485-PLUS et détection des sources d’erreurs possibles.

Contenu de la mallette
  • 1 x Mallette de rangement pratique
  • 1 x analyseur MSB-RS485-PLUS
  • 1 x Câble USB standard pour connecter l’analyseur à un PC
  • 1 x Convertisseur USB vers RS422/485 ISO485-Box
  • 1 x câble USB standard pour connecter l’interface ISO485-Box au PC
  • 4 x connecteurs à vis Phoenix à 6 broches
  • 1 x Tournevis approprié
  • 1 x CDROM avec le logiciel (Windows + Linux), le manuel de 300 pages (PDF), les pilotes et les outils supplémentaires.
  • 1 x Guide de démarrage rapide 

Garantie 3 ans
Typical analyzer software screen
Image typique du logiciel de l'analyseur
interface RS422 RS485 isolée
Interface RS485 isolée

Plus d’informations sur NeoMore.com

  MSB-RS485-PLUS Analyzer specifications

Baud RatesAny baud rate between 1Baud…20 MBaud
Data Format5…9 Data bits, none, even, odd, mark, space parity, any stop bits
Logical LinestatesDetection and display of logical linestates:
1 (V+), 0 (V-), invalid (-1.3V < IN < +1.3V
Time resolution10ns for all line change events (hardware based, OS independent)
Signal inputRS485 standard level, ±7V to ±12V, ESD protected inputs 12kΩ
Bus connectors2 Phoenix MC 1.5/6ST-3.81 with 2mm screw terminals, 6 pins each, type Phoenix MC156ST381. All connectors are linked through high speed and via software switchable RS485 buffers
Auxiliary IOsTwo additional terminals individual switchable as input (0-5V, trigger level 1.65V, 10kΩ pull up or down) or output (0/5V, ca. 50mA)
OperationThe analyzer marks every event (data byte, signal alternation) with a time stamp in 1µs resolution (independent of the PC) and send the information via USB to the connected PC
FeaturingReal time analysing and simultaneous access/display of different record parts even during an active recording
Capacity4GByte max. record file size on PC for real time analysing. Unlimited (or free hard disk space) records when using the special command line API for long time recordings
Record timeThe record time depends on the selected kind of events and data rate of the connection
Supported Protocols3964(R), BACNet, DF1, DNP3, IEC60870, MDB, Modbus (ASCII + RTU), P-NET, Profibus, SAE-J1587, SAE-J1922, SRecord, USS, 9-Bit.
Individual protocolsAdaption of any protocol and telegram display with own protocol templates written in Lua

  ISO485-Box specifications

IsolationHigh isolating strength 2000Vdc 1sec, 250Vpk working Voltage
Data rates300…3000000 Baud, also non-standard rates
HandshakeFeed back of the signals RTS/CTS and DTR/DSR in input and output for protocol simulation
Protocols7 or 8 Data bits, 1 or 2 stop bits and None, Odd, Even, Mark, Space Parity
RS422/485 SignalsTxD, RxD according to the RS485 Standard, ±15kV ESD
ChipsetFTDI FT232RL: Additional functions for high transmission safety, internal data buffer 384 bytes in both directions, unique USB serial number

Informations complémentaires

Marque

IFtools

Vous aimerez peut-être aussi…